3 credits · Spring 2027
Comp-Aided Mfg Sys (MECH 1201) at NYC College of Technology has 6 ways to take it in Spring 2027, plus 6 recitation or lab times you pair with a lecture. 12 of 12 sections have an open seat right now.
Professors teaching it: MD Rahman, Zayed Saleh, Nathan Vaisman, and Dominic Martinez.
Of the 4 professors with a Chill Rank, MD Rahman ranks chillest (Easy) and Dominic Martinez least chill (Brutal).
Compare them below, check the days and times, and add the course to your schedule.
This course meets as a lecture plus a lab. Your schedule needs one time from each, and the schedule builder picks them together.
PREREQUISITE: IND 1112 and MECH 1101 and PRE- OR CO-REQUISITE OF MAT 1275 or MAT 1275CO or Higher
A continuation of Industrial Processes with emphasis on semi-production and the function of the methods engineer. Medium run production equipment setup, economy, tolerance fixtures, CNC programming using CAD/CAM and related planning are recovered. Also covered are presswork, time and motion, machinability, feeds, speeds, job cost estimating. Students' end-of-term reports include completion of a finished product incorporating modern manufacturing methods.
1 section · 1 open · ★ 4.0 (61) · difficulty 2.6/5 · 76% would take again
2 sections · 2 open · ★ 4.1 (7) · difficulty 3.1/5 · 83% would take again
2 sections · 2 open · ★ 2.6 (30) · difficulty 2.9/5 · 57% would take again
1 section · 1 open · ★ 2.0 (12) · difficulty 3.4/5 · 23% would take again
Ordered chillest first. A Chill Rank compares a professor with other CUNY professors on Rate My Professors difficulty, rating and would-take-again; it needs at least 3 ratings. How it works
Seat status as of Oct 4, 10:36 PM ET. Seats can change between refreshes. How fresh is this?
6 of 6 lecture options · 6 lab times folded inside · 12 of 12 sections open
Chill Rank compares professors using Rate My Professors reviews, from Chill to Brutal. What each rank means
